Entering The Setup Mode And Its Basics - Ikegami ICD-879 Manual De Instrucciones

5-3. Entering the setup mode and its basics

5-3-1. SETUP MENU (Main menu)
ＳＥＴＵＰ ＭＥＮＵ
ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＳＥＮＳ ＵＰ ＳＴＤ
ＳＨＵＴＴＥＲ Ｘ３２ Ｘ３２
ＬＩＧＨＴ ＣＯＮＴ． ＬＥＮＳ
ＧＡＩＮ ＡＧＣ
ＷＨＩＴＥ ＢＡＬ． ＡＴＷ１
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＥＸＩＴ ＣＡＮＣＥＬ ＲＥＳＥＴ
(1) CAMERA ID
(2) SENS UP
(3) SHUTTER
(4) LIGHT CONTROL
(5) GAIN
(6) WHITE BALANCE
(7) SYNC
(8) MENU LOCK
(9) EXIT, CANCEL, RESET The EXIT, CANCEL or RESET action is selected and
① EXIT:
② CANCEL:
③ RESET:
* New settings can be saved, if EXIT is selected to quit the menu.
Hold down the E button longer than 2
seconds, and the menu at left appears
onscreen.
Up to 24 alpha-numeric characters can be displayed on
screen.
The electronic sensitivity up modes are selected.
The day (color) or night (Mono) mode is selected.
On or Off Selection of Flicker Free mode.
To select high speed shutter, the electronic sensitivity
multiplying factor is also selected.
The backlight compensation and sensing spot area
modes can be selected. The wide dynamic level and DC
type iris lens are adjusted.
The gain control mode is selected.
The white balance mode is selected.
The manual white balance settings are made.
The Sync systems, AC line Lock, internal Lock or Gen-
lock mode are selected.
The saved settings can be locked.
executed.
Used to save the settings and to quit the menu.
Used to return the settings to the previously saved ones.
Used to return the settings to the factory ones.
E-10
A highlighted item is now selected.