Chapter 5
Page 34
§
Remove the cover and put it down.
§
Take out the plates.
§
Put the cover back on.
NOTE
5.3.3
Moving the appliance
§
Turn off the thermostat.
§
Switch off the appliance with the On / Off switch.
§
Pull out the mains plug and insert it into the plug park provided.
§
Release both brakes.
§
Grip the appliance by the push bars and move it to the destination.
§
At the destination, apply both brakes in order to secure the appliance against movement.
§
Insert the mains plug into a suitable earthed socket.
§
Switch on the appliance with the On/Off switch.
§
Set the desired temperature using the thermostat.
5.4
Measures at the End of Operation
WARNING
Mobile appliances
§
At the destination, apply both brakes in order to secure the appliance against movement.
§
Turn off the thermostat.
§
Switch off the appliance with the On / Off switch.
§
Pull out the mains plug and insert it into the plug park provided.
Built-in appliances
§
Switch off the appliance with the On / Off switch.
Plate dispenser
TE-2/V19-26, 27-33 | TE-2/VK19-26 | TEH-1/V19-26, 27-33 | TEH-2/V19-26, 27-33 | TEUH-1/VS19-26 | TEUH-2/VS19-26, 27-33 | TEUH-2/VC19-26
EBR/V19-26, 27-33 | EBRH/V19-26, 27-33 | EBRH-2/V19-26
Appliances with cooling slots
The appliances are intended to provide cooled crockery. For this purpose, the
loaded appliances must remain in cold stores for several hours. The duration
of cooling depends on the initial crockery temperature, the temperature of the
cold store and the desired crockery temperature. The appliances must always
be free-standing in the room so that optimum air circulation is ensured by free
convection within and around the appliances.
Risk of hot surfaces
The internal surfaces of the appliance and the base plates can become hot
during operation and only cool down slowly in the air.
For cleaning, allow the appliance to cool down sufficiently with the cover re-
moved and wear suitable protective gloves.
Operation
Measures at the End of Operation
4330000_A6