Zhermack SAND Manual De Instrucciones página 109

MAINTENANCE AND USE MANUAL
This Use and Maintenance Manual provides information on the utilisation, installation and
maintenance of the SAND sandblasting equipments (versions S24, S24R, S25, S25R, S23), manufactured
by Zhermack.
• The sandblasting equipment must be used in accordance with the instructions in this manual: it is
therefore recommended that you read it carefully prior to installation and start-up. Make sure that
you read the entire manual and pay particular attention to messages written in bold type or items
highlighted by boxes and/or symbols: the symbols are designed to highlight situations involving
danger or requiring caution (see paragraph 1.2).
• Observance of standards and regulations shown in this manual will ensure that the equipment is
used properly and that maintenance work is carried out safely.
• This Use and Maintenance Manual is an integral part of the equipment: it should therefore be kept
together with the equipment so that it can be consulted as and when necessary (keep the booklet
in a secure a dry place away from sunlight, atmospheric agents, etc.). It must be available for
consultation throughout the working life of the equipment even when the equipment is sold or
finally dismantled.
• It is recommended that you keep this manual constantly updated by integrating any amendments,
additions or modifications made by the Manufacturer. Any notes or comments should be made on
the blank pages at the rear of the booklet (see Appendices: Notes).
• Use the manual properly so that it is not damaged in any way.
• Do not remove, tear or write on any part of the pages.
• If the manual is lost or damaged and its contents become illegible you can request a replacement
copy from the Manufacturer.
The purpose of this Use and Maintenance Manual is to provide users with information on how to
operate the equipment properly. The manual contains all the information needed to use the device
as intended: in particular the manual includes instructions and information on the
following:
• correct installation of the SAND sandblasting equipment;
• Detailed description of how the equipment works and its components;
• Initial start-up;
• Scheduled maintenance;
• Basic Safety and Accident Prevention info.
This manual contains nine chapters each of which covers a specific argument.
The appendices at the rear of the manual are a useful complement to these chapters.
SAND S 23 / S 24 / S 24 R / S 25 / S 25 R
EN
CHAPTER 1: INTRODUCTION
HOW TO READ AND USE THE MANUAL
1.1
109 of 176