General Information; Safety Notices And Their Meaning - Hilti POS 150 Guía Rápida

1 General information

1.1 Safety notices and their meaning

DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Symbols
Read the Read the
operating operating
instructions instructions
before use. before use.
3R
Do not look Laser
into the radiation
beam.
Avoid
exposing the
eyes to
direct
radiation.
Laser Class
3R
according to
EN 60825‑1:2007.
2 Description
2.1 Use of the product as directed
The tool is designed for measuring distances and direc-
tions, calculating target positions in 3 dimensions and
the values derived from these positions and for laying
out points using given coordinates or values relative to a
control line.
To avoid the risk of injury, use only genuine Hilti ac-
cessories and insert tools.
General Return
warning materials for
recycling
On the tool
Symbol for Laser Class III / Class 3
On the tool
Notice about the laser exit aperture on the tool.
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
Take the influences of the surrounding area into account.
Do not use the appliance where there is a risk of fire or
explosion.
Modification of the tool is not permissible.
en
15