General Information - Hilti PT 10 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
PT 10 quick tester
It is essential that the operating instructions
en
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 FCC statement (applicable in US) / IC
statement (applicable in Canada)
13 EC declaration of conformity (original)
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the PT 10 quick check device.
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
10
Component parts 1
On-button
@
Mains plug
;
Calibration switch
=
Adjusting screws
%
Beam search fine adjustment
&
Bubble level
(
PTA 10 optical level with camera
)
Filter unit
+
Operating unit
§
PTA 70 tripod adapter
Page
/
PTA 45 tripod head
10
:
PTA 40 tripod column
11
·
Rear cover
13
$
Concrete base
13
£
14
Table of Hilti tools
14 |
Screw feet
15
¡
Crank
16
Q
Disc or accessory
17
W
17
Operating unit 2
18
Power indicator
18
@
Aim laser beam at center of filter
18
;
Accuracy class selector button
=
Filter selector
%
"Beam on camera" indicator
&
Start measuring
(
Laser tool within specified tolerance
)
Laser tool not within specified tolerance
+
Laser tool moved during measuring
§
Check filter and/or accuracy class settings
/
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning