General Information - Hilti PRA 30 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
PRA 30 laser receiver / remote control
It is essential that the operating instructions
en
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Technical data
4 Safety instructions
5 Before use
6 Operation
7 Care and maintenance
8 Disposal
9 Manufacturer's warranty - tools
10 FCC statement (applicable in US) / IC
statement (applicable in Canada)
11 EC declaration of conformity (original)
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
8
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the PRA 30 (03) laser re-
ceiver.
Control panel 1
On/off button
@
Inclination entry button "Plus" / "Right" or "Up" dir-
;
ection button (with the PRA 90)
Units button
Page
=
Volume button
8
%
Inclination entry button "Minus" / "Left" or "Down"
9
&
direction button (with the PRA 90)
10
"Automatic alignment" / "surveillance mode" (ver-
10
(
tical) button (press button twice)
11
Receiving area
11
)
Marking notch
12
+
Display
13
§
13
PRA 30 laser receiver display 2
14
14
Position of the laser receiver relative to the height
@
of the laser plane
Battery status indicator
;
Volume indicator
=
Distance to the laser plane
%
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Symbols
Read the Return waste
operating
instructions
before use.
Warning: Warning:
caustic electricity
substances
>1/4s
Do not look
material for into the
recycling. beam.