Fein Slugger JCM312U Instrucciones De Uso página 19

3 41 01 169 21 0.book Seite 19 Mittwoch, 7. September 2011 3:32 15
Start drill motor.
To start the motor with clockwise
rotation, press the button with the "
symbol. The motor starts with the high-
est speed.
The last set speed can be automatically
stored (memory function). To start the
power tool with the last set speed, press
and hold the button with the "
symbol, and then press the button with
the " " symbol.
To lower the speed, press the "
button.
To stop the drill motor, press the
" " button.
Do not stop the drill motor during the
" drilling procedure.
To start the motor with anticlockwise
rotation, press the button with the "
symbol. The drill motor will run as long
as the button is pressed.
When the power supply is disconnected
"
while the motor is running, a protective cir-
cuit prevents automatic restarting of the
motor. Restart the motor again.
"
In case of overload, the motor automatically
stops and must be restarted again.
en
19
"