Fein Slugger JCM312U Instrucciones De Uso página 20

3 41 01 169 21 0.book Seite 20 Mittwoch, 7. September 2011 3:32 15
en
20
Feed.
Automatic feed JCM312auto
(Fig. 13).
Pull the spoke handles outward.
Press the „ " button.
The drill motor starts. After reaching the set
speed, the drill motor moves in the direction
of the work piece. The end of the drilling pro-
cedure is electronically detected, and the drill
motor moves back to the starting position.
Do not rotate the spoke handle during
automatic feed operation.
Do not use the automatic feed when tapping.
Manual feed JCM312auto
(Fig. 14).
Position the spoke handle in center
position as indicated in Fig. 14.
With the motor running, manually
rotate the spoke handle.
Manual feed JCM312U
(Fig. 15).
Feed using the spoke handle.
Fig. 13
Fig. 14
Fig. 15