Fein Slugger JCM312U Instrucciones De Uso página 6

3 41 01 169 21 0.book Seite 6 Mittwoch, 7. September 2011 3:32 15
en
6
– Materials for pesticide treatment on boat
and ship hulls.
To minimize the unwanted intake of these
materials:
– Use dust extraction matched appropriately
for the developing dust.
– Use personal protective equipment, such as
a P2 filter-class dust protection mask.
– Provide for good ventilation of the work-
place.
The risk from inhaling dusts depends on the
frequency how often these materials are
worked. Materials containing asbestos may
only be worked by specialists.
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level
measured at the workplace L
decibels
Measuring uncertainty K
Measured A-weighted sound power level L
(re 1 pW), in decibels
Measuring uncertainty K
Measured C-weighted peak sound pressure
level L , in decibels
pCpeak
Measuring uncertainty K
REMARK: The sum of the measured emission value and respective measuring inaccuracy rep-
resents the upper limit of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard.
Hot mixtures of sanding dust and paint/var-
nish residuals or other chemical materials in
the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:
– Avoid overheating the material being
– Empty the dust collector/container in time.
– Observe the material manufacturer's work-
Observe the relevant regulations for the
materials being worked.
(re 20 µPa), in
pA
, in decibels
pA
wA
, in decibels
wA
, in decibels
pCpeak
Wood and light-metal dust can
CAUTION
cause spontaneous combustion
or explosions.
sanded and the power tool.
ing instructions.
JCM312U
84
3
95
3
101
3
JCM312auto
84
3
95
3
101
3