Visual Inspection And Functional Checks; Inspection; Component Inspections (After Each Use And Monthly) - MSA PremAire Cadet Escape G1 Manual De Instrucciones

Ocultar thumbs Ver también para PremAire Cadet Escape G1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7

Visual Inspection and Functional Checks

7.1

Inspection

Conduct the visual inspections: Upon receipt, daily, and after use.
Inspect the entire respirator after it is cleaned and disinfected.
ANSI Standards Z88.2 and Z88.5, describe three levels of inspection procedures which are to be
performed. Refer to these documents, or to an inspection program prepared by a health professional
in establishing an inspection program. Detailed repair procedures are located in MSA User's Mainte-
nance Instructions.
If the respirator does not meet any of the following inspections, it must be removed from service.
DO NOT inspect the respirator before cleaning if there is danger of contacting hazardous contami-
nants. Clean and disinfect first, then inspect.
DO NOT use any cleaning substances that can or might attack any part of the apparatus. Misuse
can cause inhalation or skin absorption of the contaminant and result in serious injury or death.
If the respirator exhibits any of the conditions listed in the "Component Inspection" section or if the
respirator does not function properly as described in the "Functional Tests" section, the respirator
must be removed from service. Misuse can result in serious injury or death.
Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration
as specified by the manufacturer. Misuse can result in serious injury or death.
7.2

Component Inspections (After Each Use and Monthly)

All Components
(1)
Inspect all components for deterioration, dirt, cracks, debris, tears, holes, stickiness, signs of
heat or chemical related damage or other visible signs of damage.
(2)
Inspect all straps (shoulder pads, pull straps, lumbar pad, waist straps, facepiece head harness)
for tears, cuts, wear, abrasion, missing buckles or straps.
(3)
Perform all component specific inspections listed below.
Visual Inspection and Functional Checks
WARNING
WARNING
WARNING
PremAire Cadet Escape G1
US
26

Publicidad

Tabla de contenido
loading

Tabla de contenido