Hach 3400 Serie Manual Del Usuario página 5

Figure 1 Sensor styles
1 Compression, 0.5-in. diameter
2 Compression, 0.75-in. diameter
3 Compression, Teflon tip, 0.75-in.
diameter
4 Sanitary (CIP) style
5 Non-metallic general purpose
6 Boiler/condensate
Installation
W A R N I N G
Personal injury hazard. Only qualified personnel should conduct the tasks
described in this section of the manual.
Mounting
W A R N I N G
Personal injury hazard. Always consider the temperature and pressure rating of
the mounting hardware that is used to install the sensor. The hardware material
usually limits the temperature and pressure rating of the system.
For examples of sensors in different applications, refer to
Mounting hardware for T-mount, end of pipe immersion and wall insertion
is customer-supplied. The sensor must be calibrated before use. Refer to
Calibrate the sensor on page 11.
Figure 2.
English 5