Product Information; Type Key; Technical Data - salmson PRIUX MASTER-D 32-90 Instalacion Y Puesta En Servicio

5 Product information

5.1

Type key

Example: Priux master-D 32-90
Priux master
D
32
90
5.2

Technical data

Max. flow rate
Max. delivery head
speed
Mains voltage
Frequency
Rated current
Energy Efficiency Index (EEI)
Insulation class
Protection class
Power consumption P
Nominal diameters
Connection flanges
Pump weight
Permissible ambient temperature
Permissible fluid temperature
Temperature class
Max. rel. humidity
Max. permissible operating
pressure
Approved fluids
Priux master/-D
Installation and operating instructions Priux master/-D
= high-efficiency pump
= single pump
-D = double pump
32 = flange connection nominal diameter of 32
Threaded connection:
Flange connection:
Combination flange (PN 6/10):
90 = nominal delivery head in [dm]
depends on the pump type, see catalogue
depends on the pump type, see catalogue
depends on the pump type, see catalogue
1~230 V ±10% in acc. with DIN IEC 60038
50/60 Hz
see rating plate
see rating plate
see rating plate
see rating plate
see rating plate
1
see type key
see type key
depends on the pump type, see catalogue
-20°C to +40°C
-20°C to +110°C
TF110
 95%
see rating plate
Heating water (in acc. with VDI 2035/VdTÜV Tch 1466)
water/glycol mixtures, max. mixing ratio 1:1
(for mixtures with glycol the conveying data of the pump should
be corrected to those for the higher viscosity, depending on the
percentage mixing ratio)
Only use brand-name goods with corrosion protection inhibi-
tors; comply with the manufacturer's specifications and safety
data sheets.
The pump manufacturer's approval must be obtained for the use
of other fluids.
Ethylene/propylene glycol with corrosion inhibitors
Commercially available oxygen binding agents
Commercially available anti-corrosion agents
Commercially available combination products
Commercially available cooling brines
25 (Rp 1), 30 (Rp 1¼)
DN 32, 40, 50, 65, 80, 100
DN 32, 40, 50, 65
1)
1)
2)
2)
2)
2)
English
27