Electrical Current; Product Information - salmson ZEN Ô HOME Instalacion Y Puesta En Servicio

2.4 Conversion, spare parts
The pump must not be technically modified or converted. It is not permitted to
open the pump motor by removing the plastic lid. Only use original spare parts.
2.5 Transport
Unpack and check the pump and all accessories upon receipt. Report any damage
sustained in transit immediately.
Dispatch the pump in the original packing only.

2.6 Electrical current

There is a danger of an electric shock when working with electrical current.
Therefore:
• Switch off the power before beginning work on the pump and make sure that it
cannot be switched on again accidentally.
• Do not kink or nip the power cable or allow it to come into contact with heat
sources.
• The pump is protected against drips in accordance with protection class IP 42.
Protect the pump against water spray. Do not immerse in water or other fluids.

3 Product information

3.1 Type key
Secondary hot water
circulation
pump
Residential application
With isolating valves
3.2 Connections
Pompes Salmson SAS
Zen Ô home V
Zen Ô home
Screwed connection: 15 (Rp 1/2")
Zen Ô home V
threaded connection: 15 (G1") and check valves
11