Repairs - Bosch REXROTH CSS/B Manual Del Usuario

3 842 540 837 (2010.02)
NOTE!
WARNING!
CAUTION!
TS 2pv
9.1.2 Gear
( 24 Fig. 7: 1)
The gear (1) is maintenance-free.
9.1.3 Motor
( 24 Fig. 7: 2)
To ensure adequate motor (2) cooling, dirt and dust must be removed at regular
intervals from the:
• Motor surface
• Fan housing inlets
• Interior surfaces of the cooling fi ns
The cleaning intervals are based on the ambient conditions and operating conditions.
9.1.4 Toothed belt
( 24 Fig. 7: 3)
Conduct regular visual inspections for wear, particularly near the weld seam.
Note the direction of movement of the toothed belt: The arrow (welded joint) must
point towards the transport direction!
Toothed belt malfunctions
Moistening of the toothed belt with grease-dissolving substances, e.g. for cleaning
purposes, will lead to toothed belt malfunctions. There is a danger of damage to
property.

Keep grease-dissolving or aggressive cleaning agents away from the toothed
belt!

Only clean the belt section with a slightly damp cloth.

9.2 Repairs

Electric shock due to contact with live parts, unexpected belt section start-up
Severe injuries or death.

Switch off the power supply before performing any maintenance or repair work.

Switch off the compressed air supply before performing any maintenance or
repair work.

Take suitable measures to prevent inadvertent restoration.
Hot electric motor surfaces during operation
Possible burns if the hot surface (up to 70°C) is touched.

Provide appropriate safety devices to seal off the motors.

Let the system cool off for at least 30 min. before performing any maintenance
or repair work.
Bosch Rexroth AG 25
DE
EN
FR
IT
ES
PT