Assembling The Belt Section, B I 2300 Mm - Bosch REXROTH CSS/B Manual Del Usuario

3 842 540 837 (2010.02)
The belt section is delivered assembled
in partial segments.
1. Assemble leg sets over the entire
width of the belt section.
2. Assemble and align the largest
partial segment of the belt section on
leg sets.
3. Assemble the cross connector on
the fi rst part, add the drive train.
Note: Do not forget the cover tube!
4. Add the second partial segment of
the belt section, align and connect
with the fi rst partial segment using a
cross connector.
TS 2pv

6.8 Assembling the belt section, b i 2300 mm

Fig. 6
Bosch Rexroth AG
1 2
2x
SW13
M = 25 Nm
D
15
DE
EN
FR
IT
ES
PT