Festo SFC-DC-IO Serie Manual Del Usaurio página 23

Warning
Use only power units which guarantee reliable electrical
isolation of the operating voltage as per IEC/DIN
EN 60204−1. Observe also the general requirements for
PELV power circuits as per IEC/DIN EN 60204−1.
Use a closed−loop power unit.
S
To avoid electrostatic discharges and comply with
S
protection class IP54: Seal unused connections with
the protective caps supplied.
To guarantee correct functioning: Connect the SFC−DC
S
only with the following cables.
Cable
Power supply cable
Motor cable
... for reference switch
Programming cable
Only with SFC−DC−...−IO:
Control cable
Festo P.BE−K−SFC−DC−... 0512a English
Accessories type ...
KPWR−MC−1−SUB−15HC−... 2.5 / 5 / 10
KMTR−DC−SUB−15−M12−...
e.g. type SME−10... or extension cable
type KM8−M8−...
KDI−MC−M8−SUB−9−...
KES−MC−1−SUB−15−...
Length [m]
2.5 / 5 / 10
2.5
2.5 / 5 / 10
23