Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
ENGLISH
Introduction
Thank you for purchasing one of our products. Please read
instructions on use in this manual as well as the safety rules
given in the attached booklet and follow them carefully to get
the best performance from the plant and be sure that the parts
have the longest service life possible. In the interest of custom-
ers, you are recommended to have maintenance and, where
necessary, repairs carried out by the workshops of our service
organisation, since they have suitable equipment and specially
trained personnel available. All our machinery and systems are
subject to continual development. We must therefore reserve
the right to modify their construction and properties.
Description
8
8
CONTINUOUS WIRE FEEDING SYSTEM WITH FEEDER
INCORPORATED, REGULATED BY CHANGE OVER
8
SWITCH
Semiautomatic three-phase continuous wire welder with switch
9
adjustments and incorporated feeder, suitable for use with a
9
gas mixture or CO
suitable for use in medium carpentry and body shops, in agri-
9
culture and for maintenance.
The main features of COMPACT 410 welders are:
9
•
Exceptional welding characteristics with all materials as a
10
result of inductance levelling.
•
Excellent welding performance on thin metal sheets.
10
•
Provided with standard gas cylinder trolley with sturdy wheels
to facilitate movement.
10
•
Free-standing metal structure with front panel in special
10
shockproof fibre.
•
Tough handle for ease of movement.
10
•
Adequate internal space for conveniently storing metal spools
(Max 300 mm - Max 20 kg).
11
•
QBS motor braking system offering repeatable and consist-
11
ent ark striking.
•
Euro torch connection.
12
•
42 V D.C. geared motor with electronic control of wire
speed.
12
•
4 roll wire drawing unit.
12
•
A gas solenoid valve.
•
Switch for selecting 2-step and 4-step modes.
13
•
Potentiometer for the wire speed adjustment.
•
Potentiometer for "Burn back" with external adjustment.
13
•
Potentiometer for motor start-up adjustment.
74
•
Potentiometer with switch for adjusting spot-welding times.
75
Technical data
78
The technical data for this equipment is summarized in the
79
table 1.
80
82
Model
Three-phase power supply 50/60 Hz
84-88
Power supply: Z
89
Current range
90
Installation power
91
Fuse
Power factor
Open circuit voltage
Duty cycle at 100%
Duty cycle at 60%
Duty cycle at 25%
Wire dimensions
Insulation class
Protection class
Dimensions
Weight
(*) IMPORTANT: This system, tested according to EN/IEC
61000-3-3, meets the requirements of EN/IEC 61000-3-11.
8
and with cored wires with and without gas;
2
V
Ω
max
A
V
A
A
A
mm
mm
kg
Table 1
COMPACT 410
230/400
(*)
60 ÷ 400
12,5
35 (230V)
20 (400V)
0,97
20 ÷ 44
240
300
400
0,6 ÷ 1,6
H
IP 23
1060 - 780 - 600
122
- Enlaces rápidos:
- Español
- Datos Técnicos
Hide quick links:
Publicidad
Capítulos
Tabla de contenido
