General; Start Monitor; Operator Field - Nussbaum BM 25 Instrucciones De Operación

3.

General

Switch on the machine via the main switch on the left-hand
machine side.
3.1

Start monitor

After switching off the wheel balancer, the following start monitor
will be displayed after starting the PC.
1 2
3
The set-up and the sub-division of the monitor are identical for all
wheel balancer functions.
1. Status strip: Information on
- date, time
- clamping means, for which the zero sequence was exe
cuted
- the currently selected balancing program
- current wheel data
- monitor title
2. Display range
Representation of the current sequences and measure-
ments
3. Functional key strip: Display of the current assignment of
the functional keys for the individual monitor. If the symbol for
a functional key is represented in grey in a softened way, this
function is not active.
26
3.2

Operator field

5
4. Functional keys 1 to 6
Assignment in accordance with the display on the moni-
tor
5. Escape
Return to the previous monitor
6. Help
Calling of help text for the individual monitor
(only available from later software versions onwards)
7. Start
Start of the balancing sequence
8. Stop/Pos.
Abort of the balancing sequence,
from BM 35 onwards, continued rotating of the wheel
onto the second compensation position
4
6 7
13.01.2010 1 689 979 918N
8