Tools Required - KCI CelluTOME Manual Del Usuario

Complete / Stopped – 75 minutes has elapsed (safety feature)
•
Timer shows flashing 75
•
Status Indicator light is steady green
•
Vacuum and heater off
•
LEDs on in vacuum head
Vacuum Fault: – vacuum seal has been compromised (or never made)
•
Timer flashes running time elapsed (not counting)
•
Status Indicator light flashes amber after ten seconds and the
•
Vacuum and heater off
•
LEDs off in vacuum head
Other Fault / Service Unit: – heater broken, tubing unplugged, any problem other than vacuum
•
Timer shows two underscores (_ _)
•
Status Indicator light flashes amber and the
•
Vacuum and heater off
•
LEDs off in vacuum head
CONTROL UNIT STAND ASSEMBLY INSTRUCTIONS
Base Pole

TOOLS REQUIRED:

•
1/2" Box Wrench
1. Insert base pole with tapered bushing into top of base.
2. Screw hex head bolt with washers into base pole as shown.
3. Tighten securely with 1/2" box wrench.
Base
service icon
Tapered Bushing
Fender Washer
Lock Washer
Hex Head Bolt
17
vacuum icon is illuminated
is illuminated