Product Description - Bosch WBE 4420 Instrucciones De Reparacion

en 26 | WBE 4420 | Product description
2.

Product description

16
17
15
14
Pos. Denomination
1 TFT Monitor
2 Wheel protection cap, mobile
3 Wheel protection cap, stiff
4 Measurement arm
5 Calliper gauge
(electronic)
6 Cone of the control shaft
7 Laser *
Lighting *
8 Pedal
9 Control panel
10 Lower object holder tray
11 Upper object holder tray, transferable
12 Socket for connection to mains
13 ON/OFF Switch
14 Central centring flange
15 Quick locking nut
16 Manual calliper gauge
17 Measurement compass
* depending on the version, in part special accessory
|
1 695 655 424 2010-04-30
13
12
Function/what I can do with it
Software displaying (measurement values and warnings on use)
+ Operator protection from any parts projected outwards (e.g. dirt, water).
+ Start the measurement and stop the measurement, see chap. 8.3.3.
Protection from any parts projected outwards (e.g. dirt, water).
Measurement of width of the rim
+ Measure the distance of the rim and the diameter of the rim.
+ Measure the positions for the fixing of the adhesive weights.
Slot of the flange
With the Easyfix function disconnected, the position of the adhesive weights is
given by a laser beam as soon as the correct balancing position is reached (see
chap. 8.3.2 and 9.3.3).
It is inserted as soon as the electronic calliper gauge is used.
+ Lock the shaft/the wheel.
+ Rim data acquisition (optional).
WBE 4420 Control, see chap. 7.3
Preservation of the cones and of the tools.
Preservation of the balancing weights.
Connection for electric power supply cable.
WBE 4420 start-up and switch-off.
Fix the wheel.
Centre and fix the wheel on the cone
Used as reserve component when the electronic calliper gauge is damaged.
Used a reserve component when the width of the rim and its diameter cannot be
electronically measured.
1
11
10
9
8
2
3
5
6
7
4
Robert Bosch GmbH