Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch WBE 4120 Instructions De Réparation

en 42 | WBE 4120 / WBE 4120 D / WBE 4120 DT | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
€
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Warning sym-
Position on the product
bol Nature of danger / Work instructions
The position of the warning symbol on the product is to
guarantee perfect readability.
The warnings on the machine can divided into notes
on residual risks (yellow/black triangle) and additional
work instructions.
|
1 695 600 579 2016-08-02
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
Back of machine
The following information can be found here:
Machine model, 10-digit ID number, voltage (V), frequen-
cy (Hz), connected load (kW), amperage (A), max. supply
pressure (kPa), degree of protection (IP), year of manu-
facture, CE mark, EAC identifier, serial number of the
machine, barcode.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
EAC mark
€
Confirms the suitability of the machine for
Russia.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter "Checking the direction of rota-
tion")
Back of the machine
€
Indication of the operating voltage.
€
Heed the information on the rating plate.
€
The plate shown above is an example only; the vol-
tage listed here depends on the electrical version of
the machine.
Balancing Start-Stop
€
Located on the wheel protection indicates the direc-
tion to activate/stop the flange rotation.
Windows licence
€
Licence version.
€
Licence codes.
Bosch Automotive Service Solutions GmbH