Setting Rapid Heating - Siemens HB86P.72 Manual De Instrucciones

Setting rapid
heating
Suitable types of heating
Suitable temperatures

Setting rapid heating

Cancelling rapid heating
Notes
26
The rapid heating function is not suitable for all types
of heating.
3D hot air
Hot air
Top/bottom heating
Intensive heat
The rapid heating function will not work if the
temperature set is below 100 ºC.
If the temperature in the cooking compartment is only
slightly below the temperature set, the rapid heating
function is not necessary. It will not switch on.
Prerequisite: A type of heating and temperature must
have been set.
Press the c button for rapid heating.
The c symbol appears in the status bar.
The temperature control bars fill up.
Rapid heating is complete once the bars appear full.
You will hear a short signal. The c symbol goes out.
Place the dish in the cooking compartment.
Press the c button. The symbol goes out.
If you change the type of heating, rapid heating is
cancelled.
A set cooking time starts counting down right after it is
started, independently of rapid heating.
You can find out the current temperature in the
cooking compartment during rapid heating by
pressing the ± button.
To ensure an even cooking result, only put your dish
in the cooking compartment when the rapid heating
phase is complete.