Replacing The Oven Light - Siemens HB86P.72 Manual De Instrucciones

Replacing the oven
light
Method
d
Risk of electric shock.
Incorrect repairs are dangerous. Repairs may only
be carried out by one of our experienced after sales
engineers.
It is possible to replace the oven light. Heat resistant
12 V, 20 W halogen bulbs can be obtained from the
after sales service or a specialist dealer.
d
Danger of electric shock.
Never replace the oven light when the appliance is
switched on.
Pull out the mains plug or switch off the circuit breaker
in the fuse box.
Always remove the new halogen bulb from the
packaging using a dry cloth. This increases the
service life of the bulb.
1. Switch off the circuit breaker in the fuse box.
2. Place a tea towel in the cold oven to avoid
damage.
3. Remove the glass cover. To do this open the glass
cover downwards by hand.
Should you experience difficulties removing the
glass cover, use a spoon to help. (fig. A).
4. Remove the bulb and replace with the same bulb
type. (fig. B).
67