Temperature Control - Siemens HB86P.72 Manual De Instrucciones

Status bar
Setting areas
Rotation direction indicator
Temperature
control
Heating phases
14
Status bar
Types of heating
Hot air grilling
Settings area
(active)
Rotation direction
indicator
The status bar is located at the top of the display.
It shows the clock, the selected operating mode,
information and the time setting options that have
been set.
The two settings areas show suggested values that
you can change.
The setting area which is currently active is light with
black writing. You can make changes here.
You can use the ¾ and ¿ navigation buttons, you can
switch from one settings area to the other.
The arrows ¾ and ¿ in the settings areas show you
which way you can go with the navigation buttons.
Once you start the oven, both settings areas are dark
with light writing.
The Ï indicator shows you the direction in which
you can move the rotary selector.
Ð = turn the rotary selector clockwise
Ñ = turn the rotary selector anti clockwise
If arrows are shown in both directions, you can turn
the rotary selector in both directions.
The five bars in the temperature control show the
heating phases or residual heat in the cooking
compartment.
Five bars appear in the status bar after starting.
The set temperature has been reached once the last
bar is filled in.
190 ºC
Settings area