Mounting The Deflector - Stihl FS 460 C-M Manual De Instrucciones

English
Swiveling the handlebar
Transport position
2
7
N Loosen the wing screw (7) and
unscrew it until the handlebar (2)
can be turned clockwise.
N Turn the handlebar 90° and then
swing the handles down.
N Tighten down the wing screw (7)
firmly.
Working position
N Reverse the sequence described
above to swing the handles up and
turn the handlebar
counterclockwise.
20

Mounting the Deflector

Using the proper deflector
1
Deflector (1) is approved only for
mowing heads, thus deflector (1)
must be attached before attaching
a mowing head.
2
Deflector (2) is approved only for
grass cutting blades, thus
deflector (2) must be attached
before attaching a grass cutting
blade.
3
4
Limit stop (3) is approved only for
circular saw blades, thus limit
stop (3) must be attached and
guard ring (4) replaced before
attaching a circular saw blade,
see "Mounting the cutting
attachment" / "Mounting circular
saw blades".
Mounting the deflector
Deflectors (1-3) are attached to the
gearbox in the same manner.
6
5
N Set the deflector on the gearbox (5),
N screw in and tighten the screws (6)
FS 460 C-M, FS 460 C-M L