Approved Kombitools; Mounting The Bike Handle - Stihl KM 90 Manual De Instrucciones

Approved KombiTools

KM 90, KM 90 R
The following STIHL KombiTools may be
mounted on the KombiEngine
KombiTool Purpose
FS-KM Brushcutter with
mowing head
1)
FS-KM Brushcutter with
grass cutting blade
1) 2)
HL-KM 0/90° Hedge trimmer,
adjustable
1) 2)
HL-KM 135° Hedge trimmer,
adjustable
2)
HL-KM 0° Hedge trimmer
1)
FH-KM Power scythe
2)
HT-KM Pole pruner
1)
BF-KM Pick tine cultivator
2)
FCB-KM Power edger
2)
FCS-KM
2)
KB-KM Bristle brush
2)
KW-KM PowerSweep
1)
Barrier bar must be mounted on
loop handle
2)
Unsuitable or not approved for
KombiEngines with bike handle
English / USA

Mounting the Bike Handle

Removing Clamp Moldings
: Hold the lower clamp (1) and upper
clamp (2) firmly.
: Release the wing screw (3).
The clamps are loose once the wing
screw has been released. They are
pushed apart by the two springs (4
and 5).
: Pull out the wing screw.
Washer (6) remain at the tommy
screw .
: Separate the clamps.
Springs (4) and (5) remain in the
lower clamp.
11