Enable Application Part Using Foot Control Ga808 Or Wireless Foot Control Ga810; Activating The Applied Part Via Hand Control Ga804/Ga805; Activating The Coolant Pump Via Foot Control; System Settings Menu - B.Braun Aesculap GA800 Manual De Instrucciones

6.3.5 Enable application part using foot control GA808 or wireless
foot control GA810
Note
Applied parts connected to a hand control cable cannot be operated via the
foot control.
Note
When an applied part is plugged in, clockwise rotation is always pre-set.
To activate clockwise rotation:
►
Set the rotational direction button for motor 30 to clockwise rotation.
The motor direction indicator for clockwise rotation is illuminated in
the applied part control panel.
►
Activate the pedal 29.
The applied part runs clockwise.
To activate counterclockwise:
►
Set the rotational direction button for motor 30 to counterclockwise
rotation.
The motor direction indicator for counterclockwise rotation is illumi-
nated in the applied part control panel.
►
Activate the pedal 29.
The applied part runs counterclockwise.
The control unit emits an acoustic signal.
Set rotary speed range limit (for wireless foot control GA810):
►
Actuate the switch for speed range limit 31.
6.3.6

Activating the applied part via hand control GA804/GA805

Note
When an applied part is plugged in, clockwise rotation is always pre-set.
To activate clockwise rotation:
►
Set the motor direction to clockwise rotation on the control unit.
The motor direction indicator for clockwise rotation is illuminated in
the applied part control panel.
►
Activate the control element of the hand control.
The applied part rotates clockwise.
To activate counterclockwise rotation:
►
Set the motor direction to counterclockwise rotation on the control
unit.
The motor direction indicator for counterclockwise rotation is illumi-
nated in the applied part control panel.
►
Activate the control element of the hand control.
The applied part rotates counterclockwise.
The control unit emits an acoustic signal.
6.3.7

Activating the coolant pump via foot control

►
Switch the coolant and irrigation pump on/off: Briefly activate func-
tion button 28.
►
Activate the "Flush" function (continuous flushing): Activate the func-
tion button 28 for a longer period and keep pressed down.
6.4

System settings menu

Note
The system settings menu can only be called up when no applied part is
being operated.
While the system settings menu is active, the operation of the applied part
is blocked.
►
Call up the system settings menu: Activate the button for the system
settings menu h, see Chapter Fig. 1.
The system settings menu opens, see Fig. 8.
a
b
c
d
e
f
Fig. 8 System settings menu
Legend
a "Exit system settings" button
b "user profiles" button
c "motor settings" button
d "device settings" button
e "radio footcontrol" button
f "device information" button
Menu Description
user profiles Manage user profiles
motor settings Display and change the settings for the indi-
vidual applied part types
device settings Display and change the basic settings for the
control unit
radio footcontrol Connect/disconnect the GA810 wireless foot
control
device information Display information about the control unit
►
Call up menu: Activate the menu button.
►
Exit system configuration menu: Press "Exit configuration menu" a
button.
en
13