Setting The Time And Date - Franke FMY 99 P XS Manual De Usuario

. SETTING THE TIME AND DATE

Connecting the oven to your home network will set
the time and date automatically� Otherwise you will
need to set them manually
• Tap the relevant numbers to set the time�
Set the system time.
1 2 3 4 5
6 7 8 9 0
• Tap "SET" to confirm�
12:30
24-Hour Time
1 2 3 4 5
6 7 8 9 0
Once you have set the time, you will need to set the
date�
• Tap the relevant numbers to set the date�
• Tap "SET" to confirm�
8
SET
4. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of electrical
power that is compatible with a domestic network that
has a rating of more than 3 kW (16 Ampere): If your
household uses a lower power, you will need to
decrease this value (13 Ampere)�
• Tap the value on the right to select the power�
Power management
13 Ampere
16 Ampere
• Tap "OKAY" to complete initial setup�
Setup Complete
Your appliance is now configured and
ready for use!
OKAY
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal�
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours�
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it�
Heat the oven to 200 °C for around one hour�
It is advisable to air the room after using the appliance for the
first time.