Troubleshooting; Corrective Action; Warranty - Kobalt KMC 124B-03 Manual Del Usuario

Sierra multiuso de 4 pulg.
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

WARNING
• Make sure that the paddle switch (K) is in the "OFF" position and detach the battery pack
from the tool before performing troubleshooting procedures.
PROBLEM
The tool does not
work.
Wheels cannot be
installed.
Auxiliary handle
cannot be installed.
Motor overheating.

WARRANTY

For 5 years from the date of purchase, the power tool is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
1. Battery capacity is low.
2. Battery is overheating.
Wheel is the wrong size.
There is dust in the
auxiliary handle socket.
Cooling vents are
obstructed.

CORRECTIVE ACTION

1. Charge the battery pack.
2. Release the switch, wait for the battery
to cool down, then start the tool again.
Refer to specification chart for proper
wheel size.
Clean and clear the socket.
Clean and clear vents. Do not cover vents
with hand during operation.
L G Sourcing, Inc., N. Wilkesboro, NC 28659
18
Printed in China

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido