Troubleshooting; Corrective Action - Kobalt K4RS-06A Manual Del Usuario

TroubleshooTinG

WarninG: Turn the switch to the OFF position and unplug the drill from the power source
before you perform any troubleshooting procedures.
If you have any questions regarding this product, please call customer service at 1-888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Friday.
Problem
The motor does not start.
The blade binds, jams, or
burns the wood.
The saw vibrates or shakes
5-year hassle-free WarranTy
This reciprocating saw is warranted to the original purchaser from the original purchase date for five
(5) years subject to the warranty coverage described herein.
This reciprocating saw is warranted for the original user to be free from defects in material and
workmanship.
If you believe that the saw is defective at any time during the specified warranty period, simply return
the saw along with proof of purchase to the place of purchase for a free replacement or refund, or call
1-888-3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
tool after partial failure or use with improper accessories or unauthorized repair or alteration.
This warranty excludes accessories.
This warranty gives you specific legal rights, and you may also have other rights that vary from state
to state.
Possible Cause
The tool is not connected to a power
source.
1. The blade is not operating properly.
2. The blade is dull.
3. You are not using the correct blade.
4. The blade is warped.
1. The blade is damaged.
2. The blade is loose.
14

CorreCTiVe aCTion

Connect the tool to a power
source.
1. See the Operating
Instructions section of this
manual.
2. Replace or sharpen the
blade.
3. Replace the blade.
1. Replace the blade.
2. Remove the blade and
reinstall it.