Technical Specification; Intended Use; Improper Use - Ega Master 79613 Manual De Instrucciones

Max. Torque (hard thread)
Air consumption in average
Noise pressure level L
(1) Remark: Measurement acc. to DIN EN ISO 15744
(2) Remark: Measurement acc. to. DIN EN ISO
The performance data are guide values only, they depend basically on the application, the
operating pressure and the applied accessories.
The manufacturer machines are designed for commercial/industrial use only. Only trained,
skilled personnel are allowed to operate the machine.
Impact wrenches are designed for the tightening and loosening of screw fittings in a range of
performance defined by the anufacturer.
Only use the impact wrench in combination with appropriate power socket wrenches.
Absolutely avoid the use of normal socket wrenches for hand tools.
It is allowed to use appropriate extensions, joints and adapters between square and power socket
wrench. Only use the tools for the defined application areas.
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
Using the machine in a kind of area exposed to explosion hazards, which is prohibited for the
machine. Using the machine for drilling, mixing or grinding.
28

TECHNICAL SPECIFICATION

Operating pressure
Drive square
For screws up to
Torque
Air connection
ID of hose min.
Weight
pA
Noise power level L
WA
Vibration
(2)
ATEX Classification
(1)
Measurement uncertainty K: 3 dB (A)
Measurement uncertainty K: 1.5 m/s2

INTENDED USE

IMPROPER USE

6(4) bar
1"
M33
850 Nm
1800 Nm (1200 Nm)
R 1/2" female / Rd 32x1/8" male
13 mm
1.1 (1.02) m3/min
9 kg
92 dB (A)
101 dB (A)
3.2 m/s2
- IM2cT6