Ega Master 79613 Manual De Instrucciones página 36

well. Observe the following:
and hold the machine firmly and safely by hand.
has to be stopped instantly. It only may be re-started after having eliminated the
cause for the fault.
from sparks.
before work is started. Among others, this relates to dust deposits, cardboard,
packing material, textile, wood and wooden splints, but also flammable fluids and
gas.
Be extra careful in unfamiliar surroundings. There is a risk of hidden hazards such as electric lines
or other supply lines. Make sure when operating the machine that no electrical cables, gas pipes
or similar could be damaged. Use suitable and personal protective equipment.
SAFETY INSTRUCTIONS FOR PREVENTION OF HAZARDS CAUSED BY COMPRESSED AIR
tools (e.g.
maintenance, etc.) depressurize pneumatic equipment (close valve and
depressurize pneumatic hose).
damages and proper fixture.
36
PROHIBITION – Eating, drinking and smoking are forbidden during operation.
WARNING – Explosion hazard!
Operate the machine according to the intended use only.
The machine is designed for the use in areas exposed to explosion hazards as
• Valid local explosion protection directives.
• Technical specifidation of the machine.
• Markings on the machine.
• Avoid the generation of sparks.
• When operating the machine, do not push or beat against other material
• Do not slide the machine over the ground.
• If heat generation exceeds the specified surface temperature, the machine
• The work area and the next working areas should always be protected
• Flammable and explosible material has to be removed from the work area
Make sure there is adequate lighting.
WARNING – Compressed air can cause severe injury. Before working on the
installation, changing accessories or machine tools, prior to a long standstill,
CAUTION – Risk of injury by whipping pneumatic hose.
Check pneumatic hoses, connection components and fittings regularly for any