Disassembly- Re-Assembly; Storage - Ega Master 79613 Manual De Instrucciones

• Any fluid leaks have been removed.
• All safety devices on the machine have proper function.
• The oil level was checked.
• Fixtures of screw connections are tight.
• Removed container covers, screens or filters were reinstalled.
The owner ensures that all maintenance, inspection and assembly work is done by authorized
and qualified experts, who have been appropriately informed by thorough study of the operation
manual.
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively the
sectional drawings (see repair instruction). All work regarding disassembly and re-assembly, as well
as maintenance and repair have to be executed by the manufacturer or skilled staff only.
disregarding of instructions. Shut down the machine properly and let it cool down
to the ambient temperature.
machines. Retrofits or modifications of the machine can affect the explosion
protection. Therefore, retrofits or modifications are allowed upon agreement with
the manufacturer only.
The explosion-proof machine is designed in the type of protection "c" constructive safety. All
work executed on the machine, influencing the explosion protection, e. g. repairs with mechanical
machining, require an approval of an authorized expert or have to be done by the manufacturer.
The internal structure must remain unmodified.
The manufacturer service is available for all maintenance, repair and assembly work, as well as
for damages.
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature fluctuations
as well as mechanical damage.
Always store the machine in a way that important machine instructions, e. g. on stickers and
signs, are legible.
42

DISASSEMBLY- RE-ASSEMBLY

DANGER – Working with the machine without appropriate preparation and
NOTICE – Special instructions apply for the repair of explosion-proof

STORAGE