Maintenance And Upkeep - Ega Master 79613 Manual De Instrucciones

it is secure. Never hang the machine onto the supply line.
machine tool or an accessory.
be hot or sharp. Wear protective gloves!
protection, adapted to the work place requirements.
hazards, only use accessories, respectively devices, which are ATEX approved
and specified. Use low-sparking accessories.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
Damage of the machine!
transportation.
protective shoes!
precautions for persons and environment.
down to the ambient temperature
heavy assembly groups or parts. Protection against tipping, tumbling or falling
down when assembling/ disassembling the machine/parts.
Dust present at the work place could be disturbed during the maintenance
procedure and inhaled. Clean machine and work place before maintenance work.
40
WARNING – Injury due to carelessness.
ATTENTION – If the machine is fixed to suspension equipment make sure that
• Separate the machine form any external energy source before changing the
• Avoid direct contact with the machine tool during and after use as it can
Defective/ inappropriate gloves can lead to injury. Only wear proper hand
WARNING – Explosion hazard!
When operating pneumatic impact wrenches in areas exposed to explosion
CAUTION – Improper Transport, danger of life due to parts falling down!
• Never carry the machine at the supply line.
ATTENTION – Separate the machine form any external energy source before
Check that the machine is undamaged and in proper condition. Wear worker's

MAINTENANCE AND UPKEEP

WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
Additionally, observe the following:
• Secure machine against unintentional starting and let the machine cool
• Use suitable transport equipment, hoists or lifting accessories for moving
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis.