Correct Use - SICK IN4000 Direct Manual Del Usuario

Operating Instructions
IN4000 Direct
© SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012183/2008-02-01
On safety
EN 999, Safety of machinery – The positioning of
protective equipment in respect of approach
speeds of parts of the human body
EN 60204D1, Electrical equipment of machines
EN 60947D5-3, Specification for low-voltage
switchgear and controlgear – Control circuit devices
and switching elements
EN 60947D5-1, Specification for low voltage switch
gear and control gear; Control circuit devices and
switching elements. Electromechanical control
circuit devices
EN 61000D6-2, Electromagnetic compatibility
(EMC). Generic standards. Immunity standard for
industrial environments
The safety sensors must be regularly subjected to a
technical inspection as per section 5.2.
1.3

Correct use

The IN4000 Direct series safety sensors must be used
only as defined in chapter 1.2 "Applications of the
safety sensors". The safety sensors are only allowed to
be installed by qualified safety personnel and are only
allowed to be used on the machine on which they
have been installed and initialised by qualified safety
personnel as per these operating instructions.
All warranty claims against SICK AG are forfeited in
the case of any other use, or alterations being made
to devices, even as part of their mounting or
installation.
1
Chapter
107