SICK IN4000 Direct Manual Del Usuario página 121

Operating Instructions
IN4000 Direct
Fig. 4: Alignment
of the sensing
face on the IN40-
E01 safety
sensor
© SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012183/2008-02-01
Mounting
a
c
e
Fasten safety sensor with the aid of a mounting
bracket at the selected mounting location, if
possible so that it cannot be detached, and fasten
in the selected position. Tighten self-locking screws
to 1.0 Nm.
b
d
f
3
Chapter
121