SICK IN4000 Direct Manual Del Usuario página 119

Operating Instructions
IN4000 Direct
Fig. 3: Minimum
distances on
mounting the
IN40-E01 safety
sensor
© SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012183/2008-02-01
Mounting
The minimum distances stated in Fig. 3 for
neighbouring sensors, sensors mounted opposite
and the minimum distances to fixed parts of the
plant and walls must be observed.
The IN40-E01 safety sensor must be mounted such
that the sensing face is orientated towards the
moving part of the guard (door or similar). The
sensing face can be aligned if required.
3
Chapter
119