Wiring - Harbor Breeze E-BFT52CB5C1 Manual Del Usuario

CLOSEMOUNT STYLE FAN MOUNTING
2. Remove every other screw and lock washer from top
of motor housing (E).
3. Pull wires through hole in the middle of the
canopy (B) and attach canopy (B) to motor housing
(E) using the three screws and three lock washers
that were just removed. (Fig. 3)
4. Hang motor housing (E) on the tab on the
mounting bracket (C) using one of the
non-slotted holes in the canopy (B). (Fig. 4)

WIRING

WARNING: To reduce the risk of fire, electrical
shock, or personal injury, wire connectors provided with
this fan are designed to accept only one 12 gauge house
wire and two lead wires from the fan. If your house wire
is larger than 12 gauge or there is more than one house
wire to connect to the two fan lead wires, consult an
electrician for the proper size wire connectors to use.
CAUTION: Be sure outlet box is properly grounded
and that a ground (green or bare) wire is present.
WARNING: If house wires are different colors than
referred to in the following steps, stop immediately. A
professional electrician is recommended to determine wiring.
E
B
10
Fig. 2
Fig. 3
B
E
Fig. 4
C
Tab
E