Traditional And Nfpa-Compliant Bourke Lenses Adjustment; Doffing The Fire Helmet - MSA Cairns 1010 Manual De Uso

3.8

Traditional and NFPA-compliant Bourke Lenses Adjustment

WARNING!
Traditional Bourke lenses are for cosmetic purposes only and do not provide eye or face protection.
Traditional Bourke lenses are not certified to ANSI or NFPA standards.
NFPA-compliant Bourke lenses are marked on the right lens with NFPA certification information, as
well as the certifying body mark.
MSA recommends wearing approved eye protection,such as safety glasses that comply with ANSI/
ISEA Z87.1-2015, and CSA Z94.3, in conjunction with the NFPA Bourke lenses.
Failure to obey this warning can result in serious injury or death.
4

Doffing the Fire Helmet

(1) Loosen and release the chinstrap.
(2) While holding the fire helmet, turn the ratchet knob counterclockwise to loosen the headband.
(3) Remove the fire helmet.
(1) Remove the protective cover from the lens.
(2) To lower or raise the Bourke lens, grasp the edge of either
lens and move it toward or away from the face, as applicable.
MSA Cairns Fire Helmets
US
11