Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION:
Before attempting any cleaning work disconnect
the appliance from gas mains and electrical
mains.
2) WORKTOP
To keep the glass surface shiny, wash it using warm
water with soap after each use, rinse and dry. You
should also wash enameled grates, enameled caps A,
B and C and burner heads (see Fig. 5-5/A), clean
igniters AC and thermocouple sensors TC (see Fig.
5/A). Washing all of these parts in a dishwasher is
prohibited. Make sure to be careful when cleaning.
Use a small nylon brush as shown in the figure (see
Fig. 4) and leave the appliance until completely dry.
FIG. 4
CLEANING
Note: in case of regular use, the area of burners
installation can discolor due to exposure to high
temperature.
T
TC
FIG. 5/A
Cleaning should be done after the cooktop and its
components cools down completely. It is prohibited
to use scouring pads, abrasive powders and
corrosive sprays.
Long-time contact of the surface with such products
as vinegar, coffee, milk, salty water and lemon or
tomato juice, must be avoided.
FIG. 5
C
AC
11
Publicidad
Tabla de contenido
