Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8) ELECTRICAL SUPPLY
IMPORTANT: installation must be done in
compliance with the manufacturer's
instructions. Installation errors can result in
damage to people, animals or property, which
the manufacturer cannot be held liable for.
Electrical mains connection must be completed in
compliance with applicable standards and legislative
provisions.
Electrical supply voltage and power specifications are
-
given on labels inside the appliance. These should be
used for selecting appropriate cable cross-sections for
connection to electrical mains.
Before connecting power, make sure that the connector
-
or appliance are provided with reliable earthing in
compliance with currently applicable standards and
regulations. The manufacturer accepts no liability if
these requirements are not complied with.
In case of electrical mains connection via socket:
If no plug is installed on power cable C (see Fig. 10),
-
install a standard plug that corresponds to the load
given on the factory label. Connect the cable according
to the diagram in Fig. 10. Make sure to follow these
rules:
L (line) = brown cable;
N (neutral) = blue cable;
earthing symbol
= yellow\green cable.
-
Electrical power cable must be installed in such a way
that it can never heat to the temperature of 90 °C in any
point.
Do not use transition pieces, adapters or branches for
-
connection. They can cause unreliable contacts and
dangerous overheating.
-
After installation is completed, the plug must be easily
accessible.
If connecting directly to electrical mains:
-
In compliance with applicable standards, install a
single-pole disconnecting switch between the appliance
and the mains. The switch must be sized appropriately
for the appliance load.
-
Please note that the earthing cable cannot be
interrupted by installing the switch.
-
For increased safety level electrical mains connection
can be also protected using a highly sensitive
differential circuit breaker.
We strongly recommend to connect the yellow/green
earthing cable to a reliable earthing installation.
INSTALLATION
Before starting any work on the electrical part of
the
disconnected from the mains.
The manufacturer disclaims all responsibility and
liability for damage to people or property resulting
from failure to follow the requirements give below or
from making modifications to any part of the
appliance.
If modifications in the home electrical
network are required for installation, or
the appliance plug and the socket do not
match, this work must be carried out by
professional
professional electrician must make sure,
among other things, that the plug cable
cross-sections
appliance consumed power.
WARNINGS:
All
standards, as well as addenda thereto. As a
result,
requirements
Directives on:
-
Electromagnetic compatibility (EMC);
Electrical safety (LVD);
-
Restriction of the use of certain hazardous
-
substances (RoHS);
EcoDesign (ERP).
-
17
appliance,
it
must
qualified
correspond
our
products
comply
this
appliance
of
relevant
FIG. 10
be
completely
personnel.
A
to
the
with
European
conforms
to
the
European
Union
Publicidad
Tabla de contenido
