Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CERAMIC GLASS
To maintain the shine of a glass ceramic surface, it is
recommended to apply a silicon-based agent on the
glass surface before starting use. This will create a
film protecting from water and contamination. The
protective film is not durable; therefore, you should
repeat treatment with this substance frequently.
It is very important to clean the glass after use while
it is still warm. Do not use scouring pads, abrasive
products and corrosive sprays for cleaning.
Depending on contamination severity, one should
note the following:
•
Small stains can be removed using a soft sponge.
•
Residues of liquids spilled out of pans should be
removed using vinegar or lemon.
•
Be careful not to let sugar or sugar-containing
products end up on the cooktop during
cooking. If this should happen, switch the
cooktop off and immediately remove the stains
before they cool down, using warm water and a
moistened sponge.
•
Inadequate cooktop cleaning or incorrect cookware
handling may eventually lead to color spots, metal
glitter or streaks appearing on the cooktop.
Although hard to remove, these streaks are not a
symptom of cooktop malfunctioning.
•
Using steam jet for appliance cleaning is prohibited.
CLEANING
WARNINGS:
When installing cooktop components into place,
please follow these guidelines:
•
Make sure that the T slots of burner heads (Fig.
5/A) are not blocked by foreign objects.
•
Make sure that enameled caps A, B and C (Fig.
5-5/A) are correctly installed on burner heads. In
the correct position a cap installed on the head
is completely stable.
•
If a valve opens or closes with effort, do not
apply force: contact the technical assistance
service immediately.
•
Grates must be installed using appropriate
centering pins (or on aluminum profile, if
available). Check for complete stability.
•
Using steam jet for appliance cleaning is
prohibited.
12
Publicidad
Tabla de contenido
