Install The Hood - Broan Best WC23E Manual De Instrucciones

INSTALL THE HOOD

Note: at least two people will be required to mount the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood with the wall-mounting
bracket. Gently lower the hood until it securely engages the bracket. Fig.13.
3. Secure the hood with (4) mounting screws (4.8x38mm). Use drywall anchors
provided if wall studs or framing are not available. Fig. 13.
4. Attach 8" round metal duct between the hood's blower collar and duct that leads
to the outside location.
5. Tape all duct joints to make them secure and air tight.
6. Plug the power cord into the electric wall receptacle. Tuck excess cord behind
the flue.
MOUNTING SCREWS
(4.8x38mm)
WALL FRAMING
- 13 -
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
FIG. 13