MBM BRE78A Manual De Uso E Instalación página 30

in an open "glass" unsiphoned for-
mation.
The appliance must only be
used for the purposes indicat-
ed. Any other use must be
considered "IMPROPER"
therefore the manufacturer declines
all liability for any consequent dam-
age to persons or property.
Particular safety prescriptions
(obligation-prohibitions-dan-
ger) are detailed in the specif-
ic chapter concerning these issues.
Do not obstruct the heat ex-
traction
openings.
Do not leave flammable ob-
jects or material near the ap-
pliance.
cal) upstream the appliance when-
ever you need to work in safe condi-
tions.
Whenever it is necessary to
operate inside the appliance
(connections, commissioning,
checking operations, etc.) prepare
for the necessary operations (re-
moval of panels, elimination of sup-
ply) in compliance with the safety
conditions.
DUTIES AND
TIONS REQUIRED OF OPE-
RATORS
Prohibition for the homogene-
ous operator to perform any
type of operation (mainte-
nance and/or other) without having
first read the entire documentation.
The information con-
tained in this document
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
and/or dissipation
Disconnect
supplies if present
(e.g gas - electri-
QUALIFICA-
is for the use of the qualified techni-
cal operator who is authorised for:
handling, installation and mainte-
nance of the appliance in question.
and
drawn up for the "Generic" operator
(Operator with limited responsibili-
ties and tasks). Person authorised
and employed to operate the ap-
pliance with guards active and ca-
pable of performing routine mainte-
nance (cleaning the appliance).
The operators who use the
appliance must be trained in
all aspects concerning its
functioning and safety features.
They must therefore interact using
appropriate methods and instru-
ments, complying with required
safety standards.
all
The "Generic" operator must
operate on the appliance after
the technician has completed
installation (transportation, fixing
electrical, water, gas and drain con-
nections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of inter-
vention and the relevant work zo-
nes, the following classification is
provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in
which the presence of an exposed
person constitutes a risk in terms
of the health and safety of such a
person;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when op-
erating in such a way as to
avoid endangering the safety of the
- 6 -
The operating
structions have been
in-