Knobs, Keys And Indicator Light Modes And Functions; Instructions For Use; Starting Production - MBM BRE78A Manual De Uso E Instalación

Ocultar thumbs Ver también para BRE78A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
LOCATION OF MAIN COMPO-
NENTS - see SECT. IMAGES -
REF. g)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Switch-on knob (see Knobs, keys
and indicator light modes and fun-
ctions).
2. Green indicator light (see Knobs,
keys and indicator light modes and
functions).
3. Yellow indicator light (see Knobs,
keys and indicator light modes and
functions).
4. Thermostat knob (see Knobs, keys
and indicator light modes and fun-
ctions).
5. Gate valve filling water into cooking
compartment.
6. Flywheel for moving cooking com-
partment
7. Cooking compartment
8. Cover opening / closing handle
9. Pipe for introducing water in cooking
compartment
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. h)
The layout of the figures is purely indi-
cative and can undergo variations.
SWITCH-ON KNOB (ELECTRIC).
1
Performs one function:
1. Switches electricity inside circuit
on and off.
GREEN
INDICATOR
2
(GAS/ELECTRIC): The indicator
is subordinated to use of the swi-
tch-on knob. Lighting of the indica-
tor signals the operating phase.
YELLOW
INDICATOR
3
(GAS/ELECTRIC): When present,
the indicator is subordinated to use
of the thermostat knob. Lighting of
the indicator signals the heating
phase.
THERMOSTAT KNOB (ELE). It
4
performs two different functions:
1. Adjusting cooking temperature.
2. Heating phase Start/Stop.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.

INSTRUCTIONS FOR USE

WATER FILLING GATE VALVE
5
(GAS/ELE). Functions:
1. Open water flow inside cooking
compartment.
2. Close water flow inside cooking
compartment.

STARTING PRODUCTION

Before proceeding with the opera-
tions, see chapters 2 and 5
Before proceeding with these ope-
rations, see "Daily activation".
It is strictly forbidden to use
the appliance as a fryer.
LOADING COOKING COMPART-
MENT - see SECT. IMAGES -
REF. i)
Make sure the cooking compartment
is in the horizontal position (Fig.2-3).
Lift the lid of the tilting pan (Fig. 2)
The cooking compartment must
be moved with the lid up (Open)
Fig.1.
When filling the cooking com-
partment, respect the maximum
level indicated by the notch on
the inside (Fig. 4 A).
Water may be introduced into
the cooking v compartment by
acting on the water filling gate
valve: • open, adjust the amount of
LIGHT
water you wish and close again.
In order to fill the cooking com-
partment with water, you must:
- lift the lid of the cooking com-
partment if necessary,
LIGHT
- turn the water outlet pipe towards the
cooking compartment,
- open the water filling gate valve (Fig.
5 A),
- fill the tank as required,
- close the gate valve (Fig. 6 A),
- position the water outlet pipe so it
does not get in the way of the lid when
it closes.
- 15 -
7.

Publicidad

Tabla de contenido
loading

Tabla de contenido