11- Coupling The Harvester In The Rear Position (Clearance Opening) - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4.2.11- Coupling the harvester in the rear position
The harvester can harvest both in the side and in the rear position (ideal for
clearance opening). To place it in the rear position, observe the instructions
that follow:
Remove the cardan shaft (N).
1.
Remove the bolt and nut (M);
2.
Move the gearbox (A) to the position
3.
shown in the figure beside;
SIDE COUPLING
Instructions Manual
4. Preparation
(clearance opening)
REAR COUPLING
M
A
N
47