Introduction; Features - Integra Padgett B Guía De Usuario

Introduction

The Integra® Padgett® Electric Dermatome Models B and PI are intended for use in the cutting
of skin grafts for use in plastic surgery and/or burn treatment.
These instruments are intended only for professional use in hospitals and similar medical
facilities where the patient will be under the supervision of trained personnel.

Features

• Both the Model B and Model PI are available in either 120VAC or 230VAC configurations.
• The switch is located adjacent to the cutting head on the dermatome handle. The
standard model is designed for right-handed operations, but upon request, the switch
can be relocated for left-handed operation.
• The dermatome complete kit is provided in a plastic carrying case with the dermatome
handpiece, power supply, width clips, guard plate, dermatome screwdriver, and pin
position guide.
• Model B includes 2 in. (5.08 cm), 3 in. (7.62 cm) and 4 in. (10.16 cm) width clips.
• Model PI includes 2 in. (5.08 cm), 3 in. (7.62 cm), 4 in. (10.16 cm) 5 in. (12.70 cm) and 6 in.
(15.24 cm) width clips.
• Models B and PI are validated for steam (gravity & pre-vacuum), and ethylene oxide,
sterilization.
Warning: Read this manual thoroughly before using the
Integra Padgett Dermatome Models B or PI.
2