Power Take-Off Speed; Support Wheels (Wheel Version Only) - Nogueira FTN-2500 Manual De Instrucciones

3. Presentation

3.6- Power take-off speed

The Harvester leaves the factory prepared for 1000 rpm rotation. However, if
requested at the time of purchase, it can be supplied at 540 rpm.
You can change the PTO rotation from 1000 to 540, or vice versa at any time. In
this case, it will be necessary to reverse the gears in the machine's PTO gearbox.
To make this change, look for your Nogueira Reseller, only he is qualified to
carry out this procedure.
NOTE!
3.7- Support Wheels
The support wheels assist the tractor's hydraulic system to support the machine's
weight. The wheelset has articulation system with hydraulic cylinder to lift the
machine.
32
In some tractor models with 1000 rpm PTO, the PTO shaft
has 21 splines. If this is the case for your tractor, replace
the PTO yoke with 6 splines with the yoke with 21 splines
that comes with the machine).
Cardan with the
standard yoke with
6 splines.
(wheel version only)
200 mm
Instructions Manual
Yoke with 21 splines
Part suppliet with the
machine
455 mm