How To Replace The Rotor Counter Knife - Nogueira FTN-2500 Manual De Instrucciones

6. Maintenance

6.7- How to replace the rotor counter knife

Check the counter-knives every time you
sharpen the rotor knives. If the cutting
difficulty remains after sharpening, it is
likely that the counter-knives are very worn,
damaged or unregulated with the knives.
To adjust the knives with the counter-knives,
proceed as described in item 6.7.
Whenever necessary, reverse or immediately
change the counterknife as follows:
The use of PPE (Personal Protective
E q u i p m e n t ) i s m a n d a t o r y d u r i n g
operation, maintenance and adjustment
of the machine. Wear suitable gloves and
eye protection. Take special care when
handling knives and counter knife, these
components have sharp areas that can
cause injury if handled without proper
protection and care.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
PROCEDURE:
Disengage the head following the
1.
instructions in item 6.3;
Remove the 2 nuts and washers (D) and
2.
the cover (E);
Remove the 2 gears (F);
3.
Remove the gearbox (G);
4.
Remove the 2 bolts (H) and the shackle(J);
5.
92
CAUTION!
Instructions Manual
D
D
F
G
H
E
J