3-Lubrication With Oil - Nogueira FTN-2500 Manual De Instrucciones

6.12.3- Lubrication with oil
Central Gearbox (PTO)
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Recommended oil: SHC 634 (MOBILE).
Viscosity: ISO VG 460.
Specification:
ISO 12925-1 CKD
DIN 51517-3 CLP
AGMA 9005 E02
Oil capacity: 6 liters
Checking the oil level:
Wipe around the level plug on the gearbox.
Loosen the level plug and check that the oil
reaches the hole in the plug.
If it is necessary to top up the oil, remove the
breathe and add oil through the filler plug
until it leaks through the level plug hole.
Oil Change:
First exchange: after a week or 50 hours of
work, whichever comes first.
Other changes: every year or 500 hours of
work, whichever occurs first.
Procedure for oil changing:
Place the machine in a flat and level place.
1.
Put an appropriate recipient under the
2.
drain plug so that the dripped oil from
the gearboxes is collected.
Remove the breather, drain plugs 1 and
3.
2 and allow the oil to drain completely.
Replace drain plugs 1 and 2.
4.
Fill with the oil recommended by the fill
5.
plug.
Replace the breather.
6.
LEVEL
DRAIN 1
Instructions Manual
6. Maintenance
SUPPLY PLUG
BREATHER
DRAIN 2
103